Francais English Deutsch
Dr. Martin Henschke - Gerätebau

Demonstration Frames

The frames are designed to hold white boards with heights of 600 mm or 900 mm or demonstration plates with a height of 297 mm (DIN A4). They are made of anodized aluminium profiles which are screwed together. Besides the standard frames the transverse rails are available in the following lengths: 312 mm, 472 mm, 554 mm, 854 mm, and 948 mm. Together with the vertical columns the frames are 46 mm wider than the given lengths.

3D-Frame 710 mm high with feet

3D-Frame with feet

3D-Frame, 650241:

  • 3 transverse rails = 2 height units for DIN A4 plates
  • 710 mm height
  • 994 mm width
  • 358 mm depth
also available:
  • 3D-Frame, 650240

    , with 2 transverse rails = 1 height unit (378 mm total height)
  • Shelf, 650248

    , made of aluminium, 3 mm tick, 326 mm x 966 mm
  • Board Holder, 650264

    , with this item white boards (900 mm high, at least 1000 mm wide) can be mounted at the 3D-Frame

Feet for 3D-Frame, 650244:

  • each foot has a transverse rail with a hole of 10,5 mm diameter for fixing the frame at a table
  • 222 mm height
  • 358 mm depth
Top Part for 3D-Frames

Top Part for 3D-Frames, 650243:

  • 1 height unit
  • 332 mm height
  • 994 mm width
  • 358 mm depth
Frame with T-Foot

Frame 900 with T-Foot, 650234:

  • usable for white boards which are 900 mm high and at least 900 mm wide
  • 925 mm height
  • 900 mm width

Frame 600 with T-Foot, 650235

(without picture):
  • usable for white boards which are 600 mm high and at least 600 mm wide
  • 625 mm height
  • 600 mm width

Frame 994 with T-Foot, 650233

(without picture):
  • Demonstration Frame (without board holder)
  • 925 mm height
  • 994 mm width